Sunrise Square Table 90
Indicative list price, FOB Semarang · 1 × 40HQ mixed load · reviewed September 2026
This is not a final price
It is where the conversation starts. Net pricing is quoted per programme against quantity, finish and destination port, and volume, project and repeat-order pricing all move it — tell us what you are planning and we will price it properly.
Need a size we do not list?
Made to your dimensionsAltered on runs above the minimum — no tooling charge on solid timberThe standard finish, and what every price in the catalogue is quoted in. A water-based sealer that holds the honey colour without the yellowing a solvent lacquer brings, and without the solvent smell in a container that has been closed for six weeks.
UPKEEPWash annually. Recoat outdoors every two to three years, or let it silver.
Standard finish:
Fills 0% of a 20FT · 0.09 CBM
- Minimum order 1 pcs
- Lead time 45–75 days
- FOB Semarang, Tanjung Emas
- SVLK & EUDR documents
The pieces we took to IFEX 2026 — the stand selection, including everything shown on the display floor.
View the IFEX 2026 collectionAt a glance
How it ships · Knock-down, flat carton
Knock-down, so it travels flat in a carton and takes far less volume than the assembled piece — which is most of why it lands cheaper per seat.
Derived from a packed volume of 0.09 CBM per piece, against the usable volume of each box. A mixed load fits more — we plan the stow before the proforma goes out.
A square pedestal table, 90 cm, with a top of boards radiating from a round centre medallion like a sunburst, on a square pedestal of vertical slats. It seats four and brings the Sunrise pattern to a square table.
Made to order in solid plantation teak and in any of the listed finishes. Dimensions can be altered on runs above the stated minimum; there is no tooling charge for a dimensional change on solid timber.
Centimetres. Tolerance ±2 mm overall, ±1 mm on seat height.
| Dimensions | W90 × D90 × H75 cm |
|---|---|
| Weight | On request |
| Volume | 0.09 CBM |
| Packing | Knock-down, flat carton |
| Per 20FT | 301 pcs |
| Per 40FT | 623 pcs |
| Per 40HQ | 731 pcs |
| MOQ | 1 pcs |
|---|---|
| Lead time | 45–75 days |
| Materials | Teak |
| Finishes | Waterbase |
| Hardware | AISI 304 stainless (316 on request) |
| Certification | SVLK · EUDR documentation available |
Frame joints are mortise-and-tenon, locked with teak pegs. Square pedestal of vertical slats under a sunburst top. Ships knock-down in a flat carton and bolts together on site with stainless steel hardware (AISI 304 as standard, 316 on request for coastal projects).
Timber: solid plantation teak, kiln dried to 8–12% moisture content. Hardware: AISI 304 stainless as standard, 316 on request for coastal sites. Adhesive: D4 exterior-grade. Tolerance: ±2 mm on overall dimensions, ±1 mm on seat height.
Left raw, teak silvers to an even grey in roughly nine months outdoors and needs no maintenance beyond an annual wash. The change is cosmetic — the oil content that makes teak durable is unaffected.
Oiled pieces hold their honey colour and want re-oiling once a year, twice in strong equatorial sun. Do not pressure-wash above 100 bar and do not use a wire brush across the grain.
Packing: Knock-down, flat carton. Loading port: Semarang (Tanjung Emas). Terms: FOB · CIF · CNF · EXW. Documents: SVLK · EUDR pack · phytosanitary · fumigation · ISPM-15.
Cartons are five-ply with edge protection and corner board; knock-down hardware travels in a labelled bag inside the carton with an assembly sheet. Container loading is photographed and the file is sent with the shipping documents.
MORE FROM THIS COLLECTION
IFEX 2026
