Pilip Folding Arm Chair
Indicative list price, FOB Semarang · 1 × 40HQ mixed load · reviewed September 2026
This is not a final price
It is where the conversation starts. Net pricing is quoted per programme against quantity, finish and destination port, and volume, project and repeat-order pricing all move it — tell us what you are planning and we will price it properly.
Need a size we do not list?
Made to your dimensionsAltered on runs above the minimum — no tooling charge on solid timberFills 0% of a 20FT · 0.06 CBM
- Minimum order 1 pcs
- Lead time 45–75 days
- FOB Semarang, Tanjung Emas
- SVLK & EUDR documents
The pieces we took to IFEX 2026 — the stand selection, including everything shown on the display floor.
View the IFEX 2026 collectionAt a glance
How it ships · Knock-down, flat carton
Knock-down, so it travels flat in a carton and takes far less volume than the assembled piece — which is most of why it lands cheaper per seat.
Derived from a packed volume of 0.06 CBM per piece, against the usable volume of each box. A mixed load fits more — we plan the stow before the proforma goes out.
A folding armchair with a short back of vertical slats under a curved top rail, flat armrests on angled supports and crossed folding legs. Its lower back keeps it light-looking at bistro tables and on balconies, and it folds flat for storage.
Made to order in solid plantation teak and in any of the listed finishes. Dimensions can be altered on runs above the stated minimum; there is no tooling charge for a dimensional change on solid timber.
Centimetres. Tolerance ±2 mm overall, ±1 mm on seat height.
| Dimensions | W55 × D61 × H88 cm |
|---|---|
| Weight | On request |
| Volume | 0.06 CBM |
| Packing | Folds flat, carton |
| Packed in | Knock-down, flat carton |
| Per 20FT | 500 pcs |
| Per 40FT | 1035 pcs |
| Per 40HQ | 1214 pcs |
|---|---|
| MOQ | 1 pcs |
| Lead time | 45–75 days |
| Materials | Teak |
| Finishes | On request |
| Hardware | AISI 304 stainless (316 on request) |
| Certification | SVLK · EUDR documentation available |
Frame joints are mortise-and-tenon, locked with teak pegs. Crossed folding legs; armrests on angled supports. The folding joints turn on stainless steel pivot bolts (AISI 304 as standard, 316 on request), and the piece ships folded in a flat carton.
Timber: solid plantation teak, kiln dried to 8–12% moisture content. Hardware: AISI 304 stainless as standard, 316 on request for coastal sites. Adhesive: D4 exterior-grade. Tolerance: ±2 mm on overall dimensions, ±1 mm on seat height.
Left raw, teak silvers to an even grey in roughly nine months outdoors and needs no maintenance beyond an annual wash. The change is cosmetic — the oil content that makes teak durable is unaffected.
Oiled pieces hold their honey colour and want re-oiling once a year, twice in strong equatorial sun. Do not pressure-wash above 100 bar and do not use a wire brush across the grain.
Packing: Folds flat, carton. Loading port: Semarang (Tanjung Emas). Terms: FOB · CIF · CNF · EXW. Documents: SVLK · EUDR pack · phytosanitary · fumigation · ISPM-15.
Cartons are five-ply with edge protection and corner board; knock-down hardware travels in a labelled bag inside the carton with an assembly sheet. Container loading is photographed and the file is sent with the shipping documents.
MORE FROM THIS COLLECTION
IFEX 2026
